{"title":"DC Drives (1ph\/2ph Input)","description":"","products":[{"product_id":"sprint-1200-12a-1-8kw-1q-110v-230v-1ph-ac-to-dc-non-isolated","title":"Sprint 1200 12A 1.8kW 1Q 110V\/230V 1ph AC to DC Non Isolated","description":"\u003cdiv\u003e\n\u003cp itemprop=\"description\"\u003eSprint Electric 1200 - 12.0A Single Quadrant Non Isolated DC Thyristor Drive for motor speed and torque control.\u003cbr\u003e230V AC supply - 1.8kW (2.4HP) at 180V DC .\u003cbr\u003e110V AC supply - 0.9kW (1.2HP) at 90V DC.\u003cbr\u003e(Extra Low voltage variants are available see links below)\u003c\/p\u003e\n\u003cp\u003eSize:89mm Wide x 70mm Deep x 130mm High. IP00\u003cbr\u003eWeight: 0.75kg\u003c\/p\u003e\n\u003cp\u003eAdjustments:-\u003cbr\u003eMax \u0026amp; Min Speed\u003cbr\u003eRamp Time 1-20 seconds\u003cbr\u003eMaximum Current\u003cbr\u003eStability\u003cbr\u003eSwitch selectable Tach or Armature voltage feedback, and Torque control\u003cbr\u003eAdjustable IR compensation for improved AVF speed regulation\u003cbr\u003eSelectable dual voltage ac supply\u003cbr\u003eAux speed trim input available in AVF mode\u003c\/p\u003e\n\u003cp\u003eTerminals:-\u003cbr\u003eAUX INPUT +\/-\u003cbr\u003eCURRENT INPUT\u003cbr\u003e+10V OUTPUT. 2mA max. (Use a 10K Ohm pot for external speed reference).\u003cbr\u003e4-20mA INPUT\u003cbr\u003eMIN SPEED. (Connect to minimum end of external speed pot. 5K Ohms preset to common).\u003cbr\u003eSPEED INPUT. 0 to +10V speed input from pot wiper.\u003cbr\u003eCOMMON.\u003cbr\u003eRUN. Internal 12K pull up to 10V.\u003cbr\u003eTACHO INPUT. (Or select Armature Voltage feedback )\u003cbr\u003eSPEED,CURRENT AND RAMP OUTPUTS\u003cbr\u003eSTALL AND ZERO SPEED DRIVERS\u003c\/p\u003e\n\u003cp\u003eInput Current: 8A to 12A (depending on motor inductance). Integral\u003cbr\u003eInput Voltage: 110 or 230V single phase +-10% at 50\/60Hz.\u003cbr\u003eField Rating: 0.5A @ 90% input voltage (For half wave field volts 45% input voltage, connect field to F- and N)\u003cbr\u003eArmature Form Factor: Typical form factor 1.5 (load dependant).\u003c\/p\u003e\n\u003cp\u003eWall mount in clean environment or cubicle mount.\u003cbr\u003eRated at -10° to 40°C Ambient.\u003cbr\u003eVentilation space above and below: 25mm, Ventilation space at sides: 0mm.\u003cbr\u003eHeat Loss at Max output: 35W.\u003cbr\u003eMounting via  2 x M5 x 35mm vertically aligned @ 120mm\u003c\/p\u003e\n\u003cp\u003eManufacturer part number is 1200.\u003c\/p\u003e\n\u003cp\u003eDownload the Sprint 400\/800\/1200 Manual below:-\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"linkedfiles\"\u003e\n\u003cli class=\"linkedfiles_pdf\"\u003e\u003ca href=\"https:\/\/invertek.au\/cdn\/shop\/files\/Sprint-Manual-400-800-1200.pdf?v=1777769353\" target=\"_blank\" rel=\"noopener\"\u003eSprint 400 800 1200 Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963459735633,"sku":"1200","price":1663.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/sprint_1200-a.png?v=1777894176"},{"product_id":"sprint-1200e-12a-1q-115v-230v-1ph-ac-to-dc-non-isolated","title":"Sprint 1200E 12A 1Q 115V\/230V 1ph AC to DC Non Isolated","description":"","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963459768401,"sku":"1200E","price":2057.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"sprint-1200er-12a-1q-115v-230v-1ph-ac-to-dc-non-isolated","title":"Sprint 1200ER 12A 1Q 115V\/230V 1ph AC to DC Non Isolated","description":"","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963459801169,"sku":"1200ER","price":3408.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"sprint-1220-12-2a-1q-115v-230v-1ph-ac-to-dc-non-isolated","title":"Sprint 1220 12.2A 1Q 115V\/230V 1ph AC to DC Non Isolated","description":"","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963459833937,"sku":"1220","price":1430.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"sprint-1220i-12-2a-1q-115v-230v-1ph-ac-to-dc-isolated-signals","title":"Sprint 1220i 12.2A 1Q 115V\/230V 1ph AC to DC Isolated Signals","description":"","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963459866705,"sku":"1220i","price":1884.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"sprint-1220xri-12-2a-4q-115v-230v-1ph-ac-to-dc-isolated-signals","title":"Sprint 1220XRi 12.2A 4Q 115V\/230V 1ph AC to DC Isolated Signals","description":"\u003cdiv\u003e\n\u003cp itemprop=\"description\"\u003eSprint Electric 1220XRi - 12.2A Four Quadrant (Regenerative) Isolated DC Thyristor Drive for motor speed and torque control.\u003cbr\u003e230V AC supply - 1.80kW (2.4HP) at 180V DC .\u003cbr\u003e110V AC supply - 0.75kW (1.0HP) at 90V DC.\u003cbr\u003e(Extra Low voltage variants are available see links below)\u003c\/p\u003e\n\u003cp\u003eSize: 70mm Wide x 120mm Deep x 105mm High. IP21\u003cbr\u003eWeight: 0.52kg\u003cbr\u003e\u003cbr\u003eAdjustments:-\u003cbr\u003eMax \u0026amp; Min Speed\u003cbr\u003eRamp Time\u003cbr\u003eMaximum Current\u003cbr\u003eStability\u003cbr\u003eSwitch selectable Tach or Armature voltage feedback\u003cbr\u003eAdjustable IR compensation for improved AVF speed regulation\u003cbr\u003eSelectable dual voltage ac supply\u003cbr\u003eAux speed trim input available in AVF mode\u003cbr\u003eSignal level comparitor\u003c\/p\u003e\n\u003cp\u003eInpInput Current: 12.2A to 18.3A (depending on motor inductance).\u003cbr\u003eInput Voltage: 110 or 230V single phase +-10% at 50\/60Hz.\u003cbr\u003eField Rating: 1A @ 90% input voltage (For half wave field volts 45% input voltage, connect field to F- and N)\u003cbr\u003eArmature Form Factor: Typical form factor 1.5 (load dependant).\u003cbr\u003eStall protection @ 150% included\u003c\/p\u003e\n\u003cp\u003eWall mount in clean environment or cubicle mount.\u003cbr\u003eRated at -10° to 40°C Ambient.\u003cbr\u003eVentilation space above and below: 25mm, Ventilation space at sides: 0mm.\u003cbr\u003eHeat Loss at Max output: 61W.\u003cbr\u003eMounting via Symmetrical DIN rail.\u003c\/p\u003e\n\u003cp\u003eManufacturer part number is 1220XRi.\u003c\/p\u003e\n\u003cp\u003eDownload the Sprint 340XRi-1220XRi Application note and manual below:-\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"linkedfiles\"\u003e\n\u003cli class=\"linkedfiles_pdf\"\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/sprint_340XRi_680XRi_1220XRi_manual.pdf?v=1780208956\" target=\"_blank\"\u003eSprint Electric 340XRi 680XRi 1220XRi Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"linkedfiles_pdf\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/sprint_340XRi_1220XRi_application_manual.pdf?v=1780209061\" target=\"_blank\" rel=\"noopener\"\u003eSprint 340XRi 1220XRi Application Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963459899473,"sku":"1220XRi","price":3643.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/sprint_340XRi_right.png?v=1780285783"},{"product_id":"1600i-sprint-1600i-16a-1q-110v-230v-ac-to-dc-isolated-signals","title":"Sprint 1600i 16A 1Q 110V\/230V AC to DC Isolated Signals","description":"\u003cdiv\u003e\n\u003cp itemprop=\"description\"\u003eSprint Electric 1600i - 16A Single Quadrant Isolated DC Thyristor Drive for motor speed and torque control.\u003cbr\u003e240V AC supply - 2.2kW (3HP) at 180V DC.\u003cbr\u003e110V AC supply - 1.1kW (1.5Hp) at 90VDC.\u003cbr\u003e(Low voltage variants are available see links below)\u003cbr\u003e\u003cbr\u003eSize: 150mm Wide x 90mm Deep x 150mm High. IP00\u003cbr\u003eWeight: 1.0Kg\u003c\/p\u003e\n\u003cp\u003eAdjustments:-\u003cbr\u003eMax \u0026amp; Min Speed\u003cbr\u003eRamp Time\u003cbr\u003eMaximum Current\u003cbr\u003eStability\u003cbr\u003eAdjustable IR compensation for improved AVF speed regulation\u003cbr\u003eSwitch selectable Tacho or Armature voltage feedback\u003cbr\u003eSelectable dual voltage ac supply\u003cbr\u003eAux speed or torque input (selectable)\u003cbr\u003eZero speed or Stall volt free changeover contact\u003cbr\u003eRun inhibit Note  Field and power terminals remain live . (RUN must not be relied on during hazardous operations)\u003c\/p\u003e\n\u003cp\u003eInput Current: 16A to 24A (depending on motor inductance).\u003cbr\u003eInput Voltage: 110V or 240V single phase +-10% at 50\/60Hz.\u003cbr\u003eField Rating: 1A @ 90% input voltage (For half wave field volts 45% input voltage, connect field to F- and N)\u003cbr\u003eArmature Form Factor: Typical form factor 1.5 (load dependant).\u003cbr\u003eStall protection @ 150% included\u003cbr\u003e\u003cbr\u003eWall mount in clean environment or cubicle mount.\u003cbr\u003eRated at -10° to 40°C Ambient.\u003cbr\u003eHeat Loss at Max output: 50W.\u003cbr\u003eMounting via 2 x M5 by 35mm @ 140mm.\u003cbr\u003e\u003cbr\u003eManufacturer part number is 1600i.\u003cbr\u003e\u003cbr\u003eDownload the Sprint 1600-3200i manual below:-\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"linkedfiles\"\u003e\n\u003cli class=\"linkedfiles_pdf\"\u003e\u003ca href=\"https:\/\/idadrives.com\/cdn\/shop\/files\/Sprint-1600-1600i-3200i-Manual.pdf?v=1770075909\" target=\"_blank\" rel=\"noopener\"\u003eSprint 1600 1600i 3200i Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963459965009,"sku":"1600I","price":614.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/sprint-1600i-front.jpg?v=1777725587"},{"product_id":"sprint-3200i-32a-1q-230v-400v-ac-to-dc-isolated-signals","title":"Sprint 3200i 32A 1Q 230V\/400V AC to DC Isolated Signals","description":"\u003cdiv class=\"col-12 col-lg-6\"\u003e\n\u003cp\u003eThe 3200i\/32 is one of the Sprint Electric \u003ca href=\"https:\/\/www.sprint-electric.com\/product-category\/product-category\/open-chassis-mount-dc-drives\/\"\u003eOpen Chassis Mount DC Drives \u003c\/a\u003erange of products\u003c\/p\u003e\n\u003ch5\u003eRatings\u003c\/h5\u003e\n\u003ctable id=\"tablepress-96\" class=\"tablepress tablepress-id-96\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"row-1\"\u003e\n\u003cth class=\"column-1\"\u003eAC Supply Range\u003c\/th\u003e\n\u003cth class=\"column-2\"\u003eTypical Armature Voltage\u003c\/th\u003e\n\u003cth class=\"column-3\"\u003eMax Continuous Armature Current\u003c\/th\u003e\n\u003cth class=\"column-4\"\u003eNominal Power\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody class=\"row-striping row-hover\"\u003e\n\u003ctr class=\"row-2\"\u003e\n\u003ctd class=\"column-1\"\u003e200 to 264v\u003c\/td\u003e\n\u003ctd class=\"column-2\"\u003e180v\u003c\/td\u003e\n\u003ctd class=\"column-3\"\u003e32A\u003c\/td\u003e\n\u003ctd class=\"column-4\"\u003e4.5KW \/ 6.5HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"row-3\"\u003e\n\u003ctd class=\"column-1\"\u003e360 to 440v\u003c\/td\u003e\n\u003ctd class=\"column-2\"\u003e320v\u003c\/td\u003e\n\u003ctd class=\"column-3\"\u003e32A\u003c\/td\u003e\n\u003ctd class=\"column-4\"\u003e7.5KW \/ 10HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003ch5\u003eDimensions\u003c\/h5\u003e\n\u003cdiv id=\"tablepress-98_wrapper\" class=\"dt-container dt-empty-footer\"\u003e\n\u003cdiv class=\"dt-layout-row\"\u003e\n\u003cdiv class=\"dt-layout-cell dt-layout-end\"\u003e\n\u003cdiv class=\"dt-search\"\u003e\n\u003clabel for=\"dt-search-0\"\u003eSearch:\u003c\/label\u003e\u003cinput type=\"search\" class=\"dt-input\" id=\"dt-search-0\" placeholder=\"\" aria-controls=\"tablepress-98\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"dt-layout-row dt-layout-table\"\u003e\n\u003cdiv class=\"dt-layout-cell  dt-layout-full\"\u003e\n\u003ctable id=\"tablepress-98\" class=\"tablepress tablepress-id-98 dataTable\" aria-describedby=\"tablepress-98_info\"\u003e\n\u003ccolgroup\u003e\n\u003ccol data-dt-column=\"0\"\u003e\n\u003ccol data-dt-column=\"1\"\u003e\n\u003ccol data-dt-column=\"2\"\u003e\n\u003c\/colgroup\u003e\n\u003cthead\u003e\n\u003ctr class=\"row-1\"\u003e\n\u003cth class=\"column-1 dt-orderable-asc dt-orderable-desc\" data-dt-column=\"0\" rowspan=\"1\" colspan=\"1\"\u003e\n\u003cdiv class=\"dt-column-header\"\u003e\n\u003cspan class=\"dt-column-title\"\u003eHeight\u003c\/span\u003e\u003cspan class=\"dt-column-order\" role=\"button\" aria-label=\"Height: Activate to sort\" tabindex=\"0\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/th\u003e\n\u003cth class=\"column-2 dt-orderable-asc dt-orderable-desc\" data-dt-column=\"1\" rowspan=\"1\" colspan=\"1\"\u003e\n\u003cdiv class=\"dt-column-header\"\u003e\n\u003cspan class=\"dt-column-title\"\u003eWidth\u003c\/span\u003e\u003cspan class=\"dt-column-order\" role=\"button\" aria-label=\"Width: Activate to sort\" tabindex=\"0\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/th\u003e\n\u003cth class=\"column-3 dt-orderable-asc dt-orderable-desc\" data-dt-column=\"2\" rowspan=\"1\" colspan=\"1\"\u003e\n\u003cdiv class=\"dt-column-header\"\u003e\n\u003cspan class=\"dt-column-title\"\u003eDepth\u003c\/span\u003e\u003cspan class=\"dt-column-order\" role=\"button\" aria-label=\"Depth: Activate to sort\" tabindex=\"0\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody class=\"row-striping row-hover\"\u003e\n\u003ctr class=\"row-2\"\u003e\n\u003ctd class=\"column-1\"\u003e150mm\u003c\/td\u003e\n\u003ctd class=\"column-2\"\u003e200mm\u003c\/td\u003e\n\u003ctd class=\"column-3\"\u003e110mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"dt-layout-row\"\u003e\n\u003cdiv class=\"dt-layout-cell dt-layout-start\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"dt-autosize\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eAT A GLANCE\u003c\/h5\u003e\n\u003cp\u003e-Fully isolated control electronics\u003cbr\u003e-Numerous inputs and outputs for complex system applications\u003cbr\u003e-Overspeed limit\u003cbr\u003e-Over torque limit\u003cbr\u003e-Inverse time overload\u003cbr\u003e-50% stall threshold\u003cbr\u003e-Phase angle clamp\u003cbr\u003e-Precision Reference\u003cbr\u003e-Precision tach rectifier\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-12 col-lg-6\"\u003e\n\u003ch5\u003eTECHNICAL HIGHLIGHTS\u003c\/h5\u003e\n\u003cp\u003e-Torque control input for basic winding or tension control, with overspeed limiting\u003cbr\u003e-Switch selectable Tach or Armature voltage feedback\u003cbr\u003e-Volt free change over contacts for zero speed and\/or stall\u003cbr\u003e-PLC compatible input and output signals\u003cbr\u003e-Extra 50% peak torque for 30secs prior to stall trip operation\u003cbr\u003e-On board relay indicates zero speed and\/or motor overload\u003c\/p\u003e\n\u003ch5\u003eSIGNAL INPUTS:\u003c\/h5\u003e\n\u003cp\u003e-Speed\u003cbr\u003e-Torque\u003cbr\u003e-Auxiliary speed inputs +ve and -ve\u003cbr\u003e-4-20mA and 0-20mA\u003cbr\u003e-Drive run\u003cbr\u003e-Tachogenerator\u003c\/p\u003e\n\u003ch5\u003eSIGNAL OUTPUTS:\u003c\/h5\u003e\n\u003cp\u003e-Speed\u003cbr\u003e-Current\u003cbr\u003e-Setpoint ramp\u003cbr\u003e-Total demand\u003cbr\u003e-Zero speed and stall relay driver\u003cbr\u003e– +\/-12 +\/- 24v rails\u003c\/p\u003e\n\u003c\/div\u003e","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460128849,"sku":"3200I-32-LL","price":1810.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/sprint-3200-a.jpg?v=1779867847"},{"product_id":"sprint-3200i-32a-1q-115v-230v-ac-to-dc-isolated-signals","title":"Sprint 3200i 32A 1Q 115V\/230V AC to DC Isolated Signals","description":"\u003cdiv class=\"col-12 col-lg-6\"\u003e\n\u003cdiv\u003e\n\u003cp itemprop=\"description\"\u003eSprint Electric 3200i - 32A Single Quadrant Isolated DC Thyristor Drive for motor speed and torque control.\u003c\/p\u003e\n\u003cp\u003e115V AC supply - 2.2kW(10.0HP) at 90V DC.\u003cbr\u003e230V AC supply - 4.5kW (6.0HP) at 180VDC.\u003cbr\u003e(Low voltage variants are available see links below)\u003c\/p\u003e\n\u003cp\u003eSize: 200mm Wide x 110mm Deep x 150mm High. IP00\u003cbr\u003eWeight: 2.0Kg\u003c\/p\u003e\n\u003cp\u003eAdjustments:-\u003cbr\u003eMax \u0026amp; Min Speed\u003cbr\u003eRamp Time\u003cbr\u003eMaximum Current\u003cbr\u003eStability\u003cbr\u003eAdjustable IR compensation for improved AVF speed regulation\u003cbr\u003eSwitch selectable Tacho or Armature voltage feedback\u003cbr\u003eSelectable dual voltage ac supply\u003cbr\u003eAux speed or torque input (selectable)\u003cbr\u003eZero speed or Stall volt free changeover contact\u003cbr\u003eRun inhibit Note  Field and power terminals remain live . (RUN must not be relied on during hazardous operations)\u003cbr\u003e\u003cbr\u003eInput Current: 32A to 48A (depending on motor inductance).\u003cbr\u003eInput Voltage: 115V or 240V single phase +-10% at 50\/60Hz.\u003cbr\u003eField Rating: 2A @ 90% input voltage (For half wave field volts 45% input voltage, connect field to F- and N)\u003cbr\u003eArmature Form Factor: Typical form factor 1.5 (load dependant).\u003cbr\u003eStall protection @ 150% included\u003c\/p\u003e\n\u003cp\u003eWall mount in clean environment or cubicle mount.\u003cbr\u003eRated at -10° to 40°C Ambient.\u003cbr\u003eHeat Loss at Max output: 100W.\u003cbr\u003eMounting via 2 x M5 by 50mm @ 140mm.\u003c\/p\u003e\n\u003cp\u003eManufacturer part number is 3200i\/32\/LN (Also known as 3200i\/32\/LN-001)\u003c\/p\u003e\n\u003cp\u003eAuxiliary terminal added features: Unprotected +\/- 24V and 12V rails, rated at 25ma and 10ma respectively.\u003cbr\u003eAuxiliary speed and torque inputs. \u003cbr\u003eSpeed demand, speed and setpoint ramp analogue outputs.\u003cbr\u003eZero speed and stall relay driver outputs.\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003eDownload the Sprint 1600-3200i manual below:-\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"linkedfiles\"\u003e\n\u003cli class=\"linkedfiles_pdf\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/Sprint-1600-1600i-3200i-Manual.pdf?v=1770075910\" target=\"_blank\" rel=\"noopener\"\u003eSprint 1600 1600i 3200i Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460161617,"sku":"3200I-32-LN","price":1771.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/sprint-3200-a.jpg?v=1779867847"},{"product_id":"sprint-3200i-48a-1q-230v-400v-1ph-ac-to-dc-isolated-signals","title":"Sprint 3200i 48A 1Q 230V\/400V 1ph AC to DC Isolated Signals","description":"\u003cdiv class=\"col-12 col-lg-6\"\u003e\n\u003cp\u003eThe 3200i\/48 is one of the Sprint Electric \u003ca href=\"https:\/\/www.sprint-electric.com\/product-category\/product-category\/open-chassis-mount-dc-drives\/\"\u003eOpen Chassis Mount DC Drives \u003c\/a\u003erange of products\u003c\/p\u003e\n\u003ch5\u003eRatings\u003c\/h5\u003e\n\u003ctable id=\"tablepress-97\" class=\"tablepress tablepress-id-97\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"row-1\"\u003e\n\u003cth class=\"column-1\"\u003eAC Supply Range\u003c\/th\u003e\n\u003cth class=\"column-2\"\u003eTypical Armature Voltage\u003c\/th\u003e\n\u003cth class=\"column-3\"\u003eMax Continuous Armature Current\u003c\/th\u003e\n\u003cth class=\"column-4\"\u003eNominal Power\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody class=\"row-striping row-hover\"\u003e\n\u003ctr class=\"row-2\"\u003e\n\u003ctd class=\"column-1\"\u003e200 to 264v\u003c\/td\u003e\n\u003ctd class=\"column-2\"\u003e180v\u003c\/td\u003e\n\u003ctd class=\"column-3\"\u003e48A\u003c\/td\u003e\n\u003ctd class=\"column-4\"\u003e7KW \/ 10HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"row-3\"\u003e\n\u003ctd class=\"column-1\"\u003e360 to 440v\u003c\/td\u003e\n\u003ctd class=\"column-2\"\u003e320v\u003c\/td\u003e\n\u003ctd class=\"column-3\"\u003e48A\u003c\/td\u003e\n\u003ctd class=\"column-4\"\u003e11KW \/ 14.6HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003e\u003cbr\u003e\u003c\/h5\u003e\n\u003ch5\u003eDimensions\u003c\/h5\u003e\n\u003cdiv id=\"tablepress-98_wrapper\" class=\"dt-container dt-empty-footer\"\u003e\n\u003cdiv class=\"dt-layout-row dt-layout-table\"\u003e\n\u003cdiv class=\"dt-layout-cell  dt-layout-full\"\u003e\n\u003ctable id=\"tablepress-98\" class=\"tablepress tablepress-id-98 dataTable\" aria-describedby=\"tablepress-98_info\"\u003e\n\u003ccolgroup\u003e \u003ccol data-dt-column=\"0\"\u003e \u003ccol data-dt-column=\"1\"\u003e \u003ccol data-dt-column=\"2\"\u003e \u003c\/colgroup\u003e\n\u003cthead\u003e\n\u003ctr class=\"row-1\"\u003e\n\u003cth class=\"column-1 dt-orderable-asc dt-orderable-desc\" data-dt-column=\"0\" rowspan=\"1\" colspan=\"1\"\u003e\n\u003cdiv class=\"dt-column-header\"\u003e\n\u003cspan class=\"dt-column-title\"\u003eHeight\u003c\/span\u003e\u003cspan class=\"dt-column-order\" role=\"button\" aria-label=\"Height: Activate to sort\" tabindex=\"0\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/th\u003e\n\u003cth class=\"column-2 dt-orderable-asc dt-orderable-desc\" data-dt-column=\"1\" rowspan=\"1\" colspan=\"1\"\u003e\n\u003cdiv class=\"dt-column-header\"\u003e\n\u003cspan class=\"dt-column-title\"\u003eWidth\u003c\/span\u003e\u003cspan class=\"dt-column-order\" role=\"button\" aria-label=\"Width: Activate to sort\" tabindex=\"0\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/th\u003e\n\u003cth class=\"column-3 dt-orderable-asc dt-orderable-desc\" data-dt-column=\"2\" rowspan=\"1\" colspan=\"1\"\u003e\n\u003cdiv class=\"dt-column-header\"\u003e\n\u003cspan class=\"dt-column-title\"\u003eDepth\u003c\/span\u003e\u003cspan class=\"dt-column-order\" role=\"button\" aria-label=\"Depth: Activate to sort\" tabindex=\"0\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody class=\"row-striping row-hover\"\u003e\n\u003ctr class=\"row-2\"\u003e\n\u003ctd class=\"column-1\"\u003e150mm\u003c\/td\u003e\n\u003ctd class=\"column-2\"\u003e200mm\u003c\/td\u003e\n\u003ctd class=\"column-3\"\u003e110mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"dt-layout-row\"\u003e\n\u003cdiv class=\"dt-layout-cell dt-layout-start\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"dt-layout-cell dt-layout-end\"\u003e\n\u003cdiv class=\"dt-paging paging_simple_numbers\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"dt-autosize\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eAT A GLANCE\u003c\/h5\u003e\n\u003cp\u003e-Fully isolated control electronics\u003cbr\u003e-Numerous inputs and outputs for complex system applications\u003cbr\u003e-Overspeed limit\u003cbr\u003e-Over torque limit\u003cbr\u003e-Inverse time overload\u003cbr\u003e-50% stall threshold\u003cbr\u003e-Phase angle clamp\u003cbr\u003e-Precision Reference\u003cbr\u003e-Precision tach rectifier\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-12 col-lg-6\"\u003e\n\u003ch5\u003eTECHNICAL HIGHLIGHTS\u003c\/h5\u003e\n\u003cp\u003e-Torque control input for basic winding or tension control, with overspeed limiting\u003cbr\u003e-Switch selectable Tach or Armature voltage feedback\u003cbr\u003e-Volt free change over contacts for zero speed and\/or stall\u003cbr\u003e-PLC compatible input and output signals\u003cbr\u003e-Extra 50% peak torque for 30secs prior to stall trip operation\u003cbr\u003e-On board relay indicates zero speed and\/or motor overload\u003c\/p\u003e\n\u003ch5\u003eSIGNAL INPUTS:\u003c\/h5\u003e\n\u003cp\u003e-Speed\u003cbr\u003e-Torque\u003cbr\u003e-Auxiliary speed inputs +ve and -ve\u003cbr\u003e-4-20mA and 0-20mA\u003cbr\u003e-Drive run\u003cbr\u003e-Tachogenerator\u003c\/p\u003e\n\u003ch5\u003eSIGNAL OUTPUTS:\u003c\/h5\u003e\n\u003cp\u003e-Speed\u003cbr\u003e-Current\u003cbr\u003e-Setpoint ramp\u003cbr\u003e-Total demand\u003cbr\u003e-Zero speed and stall relay driver\u003cbr\u003e– +\/-12 +\/- 24v rails\u003c\/p\u003e\n\u003c\/div\u003e","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460194385,"sku":"3200I-48-LL","price":1888.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/sprint-3200-a.jpg?v=1779867847"},{"product_id":"sprint-340-3-4a-1q-115v-230v-1ph-ac-to-dc-non-isolated","title":"Sprint 340 3.4A 1Q 115V\/230V 1ph AC to DC Non Isolated","description":"\u003cdiv\u003e\n\u003cp itemprop=\"description\"\u003eSprint Electric 340 - 3.4A Single Quadrant Non Isolated DC Thyristor Drive for motor speed and torque control.\u003cbr\u003e230V AC supply - 0.55kW (0.74HP) at 180V DC .\u003cbr\u003e110V AC supply - 0.25kW (0.34HP) at 90V DC.\u003cbr\u003e\u003cem\u003e(Extra Low voltage variants are available see links below)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eSize: 35mm Wide x 120mm Deep x 105mm High. IP21\u003cbr\u003eWeight: 0.37kg\u003cbr\u003e\u003cbr\u003eAdjustments:-\u003cbr\u003eMax \u0026amp; Min Speed\u003cbr\u003eRamp Time\u003cbr\u003eMaximum Current\u003cbr\u003eSwitch selectable Tach or Armature voltage feedback\u003cbr\u003eAdjustable IR compensation for improved AVF speed regulation\u003cbr\u003eSelectable dual voltage ac supply\u003cbr\u003eAux speed trim input available in AVF mode\u003c\/p\u003e\n\u003cp\u003eTerminals:-\u003cbr\u003e1.  +10V OUTPUT. 2mA max. (Use a 10K Ohm pot for external speed reference).\u003cbr\u003e2.  MIN SPEED. (Connect to minimum end of external speed pot. 5K Ohms preset to common).\u003cbr\u003e3.  SPEED INPUT. 0 to +10V speed input from pot wiper.\u003cbr\u003e4.  COMMON.\u003cbr\u003e5.  RUN. Internal 12K pull up to 12V. Open to stop, close to COMMON to run.\u003cbr\u003e6.  TACHO INPUT. (Or select Armature Voltage feedback Note: in this mode this terminal can be used as a speed trim)\u003cbr\u003e\u003cbr\u003eInput Current: 3.4A to 5.1A (depending on motor inductance).\u003cbr\u003eInput Voltage: 110 or 230V single phase +-10% at 50\/60Hz.\u003cbr\u003eField Rating: 1A @ 90% input voltage (For half wave field volts 45% input voltage, connect field to F- and N)\u003cbr\u003eArmature Form Factor: Typical form factor 1.5 (load dependant).\u003c\/p\u003e\n\u003cp\u003eWall mount in clean environment or cubicle mount.\u003cbr\u003eRated at -10° to 40°C Ambient.\u003cbr\u003eVentilation space above and below: 25mm, Ventilation space at sides: 0mm.\u003cbr\u003eHeat Loss at Max output: 17W.\u003cbr\u003eMounting via Symmetrical DIN rail.\u003c\/p\u003e\n\u003cp\u003eManufacturer part number is 340.\u003c\/p\u003e\n\u003cp\u003eDownload the Sprint 340-1220 Manual below:-\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"linkedfiles\"\u003e\n\u003cli class=\"linkedfiles_pdf\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/Sprint-340-680-1220-Manual.pdf?v=1777774772\" target=\"_blank\" rel=\"noopener\"\u003eSprint Electric 340 680 1220 Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460227153,"sku":"340","price":782.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/sprint_340-a.jpg?v=1777807729"},{"product_id":"sprint-340i-3-4a-1q-115v-230v-1ph-ac-to-dc-isolated-signals","title":"Sprint 340i 3.4A 1Q 115V\/230V 1ph AC to DC Isolated Signals","description":"\u003cdiv\u003e\n\u003cp itemprop=\"description\"\u003eSprint Electric 340i 3.4A Single Quadrant Isolated DC Thyristor Drive for motor speed and torque control.\u003cbr\u003eTypical Motor Output from 230V AC supply:  0.55kW (0.75HP) at 180V DC for speed and torque control.\u003cbr\u003eTypical Motor Output from 110V AC supply:  0.25kW (0.33HP) at 90V DC.\u003cbr\u003e\u003cem\u003e(Extra Low voltage variants are available see links below)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eDimensions: 60mm Wide x 120mm Deep x 105mm High.\u003cbr\u003eEnclosure Rating: IP21.\u003cbr\u003eWeight: 0.52kg.\u003cbr\u003e\u003cbr\u003eAdjustments:-\u003cbr\u003eMax \u0026amp; Min Speed.\u003cbr\u003eRamp Time.\u003cbr\u003eMaximum Current.\u003cbr\u003eStability.\u003cbr\u003eSwitch selectable Tach or Armature voltage feedback.\u003cbr\u003eAdjustable IR compensation for improved AVF speed regulation.\u003cbr\u003eSelectable dual voltage ac supply.\u003cbr\u003eAux speed trim input available in AVF mode.\u003cbr\u003eSignal level comparitor.\u003c\/p\u003e\n\u003cp\u003eInput Current: 3.4A to 5.1A (depending on motor inductance).\u003cbr\u003eInput Voltage: 110V or 230V single phase +-10% at 50\/60Hz.\u003cbr\u003eField Rating: 1A @ 90% input voltage (For half wave field volts 45% input voltage, connect field to F- and N).\u003cbr\u003eArmature Form Factor: Typical form factor 1.5 (load dependant).\u003cbr\u003eStall protection @ 150% included\u003c\/p\u003e\n\u003cp\u003eMounting: Cubicle mount via Symmetrical DIN rail.\u003cbr\u003eAmbient Temperature: Rated at -10° to 40°C.\u003cbr\u003eVentilation space above and below: 25mm, Ventilation space at sides: 0mm.\u003cbr\u003eHeat Loss: 17W at maximum output.\u003c\/p\u003e\n\u003cp\u003ePart Number: 340i.\u003c\/p\u003e\n\u003cp\u003eDownload the Sprint 340i-1220i Manual via the link below:-\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"linkedfiles\"\u003e\n\u003cli class=\"linkedfiles_pdf\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/Sprint-340i-680i-1220i-Manual.pdf?v=1777777673\" target=\"_blank\" rel=\"noopener\"\u003eSprint 340i 680i 1220i Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460259921,"sku":"340i","price":818.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/sprint_340i-a.png?v=1777894158"},{"product_id":"sprint-340xri-3-4a-4q-115v-230v-1ph-ac-to-dc-isolated-signals","title":"Sprint 340XRi 3.4A 4Q 115V\/230V 1ph AC to DC Isolated Signals","description":"\u003cdiv\u003e\n\u003cp itemprop=\"description\"\u003eSprint Electric 340XRi - 3.4A Four Quadrant (Regenerative) Isolated DC Thyristor Drive for motor speed and torque control.\u003cbr\u003e230V AC supply - 0.55kW (0.74HP) at 180V DC .\u003cbr\u003e110V AC supply - 0.25kW (0.34HP) at 90V DC.\u003cbr\u003e\u003cem\u003e(Extra Low voltage variants are available see links below)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eSize: 60mm Wide x 120mm Deep x 105mm High. IP21\u003cbr\u003eWeight: 0.52kg\u003cbr\u003e\u003cbr\u003eAdjustments:-\u003cbr\u003eMax \u0026amp; Min Speed\u003cbr\u003eRamp Time\u003cbr\u003eMaximum Current\u003cbr\u003eStability\u003cbr\u003eSwitch selectable Tach or Armature voltage feedback\u003cbr\u003eAdjustable IR compensation for improved AVF speed regulation\u003cbr\u003eSelectable dual voltage ac supply\u003cbr\u003eAux speed trim input available in AVF mode\u003cbr\u003eSignal level comparitor\u003c\/p\u003e\n\u003cp\u003eInput Current: 3.4A to 5.1A (depending on motor inductance).\u003cbr\u003eInput Voltage: 110 or 230V single phase +-10% at 50\/60Hz.\u003cbr\u003eField Rating: 1A @ 90% input voltage (For half wave field volts 45% input voltage, connect field to F- and N)\u003cbr\u003eArmature Form Factor: Typical form factor 1.5 (load dependant).\u003cbr\u003eStall protection @ 150% included\u003c\/p\u003e\n\u003cp\u003eWall mount in clean environment or cubicle mount.\u003cbr\u003eRated at -10° to 40°C Ambient.\u003cbr\u003eVentilation space above and below: 25mm, Ventilation space at sides: 0mm.\u003cbr\u003eHeat Loss at Max output: 17W.\u003cbr\u003eMounting via Symmetrical DIN rail.\u003c\/p\u003e\n\u003cp\u003eManufacturer part number is 340XRi.\u003c\/p\u003e\n\u003cp\u003eDownload the Sprint 340XRi-1220XRi Application note and manual below:-\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"linkedfiles\"\u003e\n\u003cli class=\"linkedfiles_pdf\"\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/sprint_340XRi_680XRi_1220XRi_manual.pdf?v=1780208956\" target=\"_blank\"\u003eSprint Electric 340XRi 680XRi 1220XRi Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"linkedfiles_pdf\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/sprint_340XRi_1220XRi_application_manual.pdf?v=1780209061\" target=\"_blank\" rel=\"noopener\"\u003eSprint 340XRi 1220XRi Application Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460292689,"sku":"340XRi","price":2931.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/sprint_340XRi_right.png?v=1780285783"},{"product_id":"3600xri-16-ll-16a-4q-230v-400v-1ph-ac-to-dc-isolated-signals-001","title":"3600XRi\/16\/LL 16A 4Q 230V\/400V 1ph AC to DC Isolated Signals 001","description":"","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460325457,"sku":"3600XRi-16-LL","price":4379.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"3600xri-16-ln-16a-4q-115v-230v-1ph-ac-to-dc-isolated-signals","title":"3600XRi\/16\/LN 16A 4Q 115V\/230V 1ph AC to DC Isolated Signals","description":"","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460358225,"sku":"3600XRi-16-LN","price":4379.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"3600xri-32-ll-32a-4q-230v-400v-1ph-ac-to-dc-isolated-signals","title":"3600XRi\/32\/LL 32A 4Q 230V\/400V 1ph AC to DC Isolated Signals","description":"","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460390993,"sku":"3600XRi-32-LL","price":2656.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"3600xri-32-lv60-32a-4q-30v-60v-1ph-ac-to-dc-isolated-signals","title":"3600XRi\/32\/LV60 32A 4Q 30V\/60V 1ph AC to DC Isolated Signals","description":"","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460423761,"sku":"3600XRi-32-LV60","price":4679.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"3600xri-36-ll-36a-4q-230v-400v-1ph-ac-to-dc-isolated-signals","title":"3600XRi\/36\/LL 36A 4Q 230V\/400V 1ph AC to DC Isolated Signals","description":"","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460456529,"sku":"3600XRi-36-LL","price":2725.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"sprint-370-3-7a-1q-110v-230v-1ph-ac-to-dc-non-isolated","title":"Sprint 370 3.7A 1Q 115V\/230V 1ph AC to DC Non Isolated","description":"\u003cdiv\u003e\n\u003cp itemprop=\"description\"\u003eSprint Electric 370 - 3.7A Single Quadrant Non Isolated DC Thyristor Drive for motor speed and torque control.\u003cbr\u003e230V AC supply - 0.55kW (0.74HP) at 180V DC .\u003cbr\u003e110V AC supply - 0.25kW (0.34HP) at 90V DC.\u003cbr\u003e(Extra Low voltage variants are available see links below)\u003c\/p\u003e\n\u003cp\u003eSize:100mm Wide x 40mm Deep x 97mm High. IP00\u003cbr\u003eWeight: 0.33kg\u003c\/p\u003e\n\u003cp\u003eAdjustments:-\u003cbr\u003eMax \u0026amp; Min Speed\u003cbr\u003eRamp Time 1-20 seconds\u003cbr\u003eMaximum Current\u003cbr\u003eSwitch selectable Tach or Armature voltage feedback\u003cbr\u003eAdjustable IR compensation for improved AVF speed regulation\u003cbr\u003eSelectable dual voltage ac supply\u003cbr\u003eAux speed trim input available in AVF mode\u003c\/p\u003e\n\u003cp\u003eTerminals:-\u003cbr\u003e1.  +10V OUTPUT. 2mA max. (Use a 10K Ohm pot for external speed reference).\u003cbr\u003e2.  MIN SPEED. (Connect to minimum end of external speed pot. 5K Ohms preset to common).\u003cbr\u003e3.  SPEED INPUT. 0 to +10V speed input from pot wiper.\u003cbr\u003e4.  COMMON.\u003cbr\u003e5.  RUN. Internal 12K pull up to 10V.\u003cbr\u003e6.  TACHO INPUT. (Or select Armature Voltage feedback )\u003c\/p\u003e\n\u003cp\u003eInput Current: 3.7A to 5.6A (depending on motor inductance).\u003cbr\u003eInput Voltage: 110 or 230V single phase +-10% at 50\/60Hz.\u003cbr\u003eField Rating: 0.5A @ 90% input voltage (For half wave field volts 45% input voltage, connect field to F- and N)\u003cbr\u003eArmature Form Factor: Typical form factor 1.5 (load dependant).\u003c\/p\u003e\n\u003cp\u003eWall mount in clean environment or cubicle mount.\u003cbr\u003eRated at -10° to 40°C Ambient.\u003cbr\u003eVentilation space above and below: 25mm, Ventilation space at sides: 0mm.\u003cbr\u003eHeat Loss at Max output: 19W.\u003cbr\u003eMounting via 4 x M4 x 20mm @ 90mm by 86mm\u003c\/p\u003e\n\u003cp\u003eManufacturer part number is 370.\u003c\/p\u003e\n\u003cp\u003eDownload the Sprint 370 Manual below:-\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"linkedfiles\"\u003e\n\u003cli class=\"linkedfiles_pdf\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/sprint_370Man.pdf?v=1780207836\" target=\"_blank\" rel=\"noopener\"\u003eSprint 370 Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460489297,"sku":"370","price":716.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/sprint_370.jpg?v=1780212538"},{"product_id":"1q-dc-drive-enclosed-on-off-fuse-speed-setting-pot","title":"1Q DC Drive, Enclosed - on\/off, fuse \u0026 speed setting pot","description":"\u003cdiv\u003e\n\u003cp itemprop=\"description\"\u003eSprint 370E - 3.7A Single Quadrant DC Thyristor Drive for 230 or 110V single phase AC input.\u003cbr\u003e230V AC supply - 0.55kW (0.75HP) at 180V DC for motor speed and torque control.\u003cbr\u003e110V AC supply - 0.25kW (0.37HP) at 90V DC.\u003cbr\u003eSimple to set-up in analogue form.\u003cbr\u003eAluminium Enclosure: 175mm Wide x 100mm Deep x 250mm High.\u003c\/p\u003e\n\u003cp\u003eControls Include...\u003cbr\u003e•On\/Off AC supply rocker switch\u003cbr\u003e•Set speed potentiometer\u003cbr\u003e•AC supply fuse\u003cbr\u003e\u003cbr\u003eFeatures...\u003cbr\u003eFully fused\u003c\/p\u003e\n\u003cp\u003eFull part number is - 370E\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"linkedfiles\"\u003e\n\u003cli class=\"linkedfiles_pdf\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/sprint_enclosure_manual.pdf?v=1780208571\" target=\"_blank\" rel=\"noopener\"\u003eSprint Enclosure Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460522065,"sku":"370E","price":1467.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/sprint_370E_left.png?v=1780285759"},{"product_id":"sprint-400-4a-1q-110v-230v-ac-to-dc-non-isolated","title":"Sprint 400 4A 1Q 110V\/230V AC to DC Non Isolated","description":"\u003cdiv\u003e\n\u003cp itemprop=\"description\"\u003eSprint Electric 400 - 4.0A Single Quadrant Non Isolated DC Thyristor Drive for motor speed and torque control.\u003cbr\u003e230V AC supply - 0.55kW (0.74HP) at 180V DC .\u003cbr\u003e110V AC supply - 0.25kW (0.34HP) at 90V DC.\u003cbr\u003e(Extra Low voltage variants are available see links below)\u003c\/p\u003e\n\u003cp\u003eSize:89mm Wide x 40mm Deep x 130mm High. IP00\u003cbr\u003eWeight: 0.35kg\u003c\/p\u003e\n\u003cp\u003eAdjustments:-\u003cbr\u003eMax \u0026amp; Min Speed\u003cbr\u003eRamp Time 1-20 seconds\u003cbr\u003eMaximum Current\u003cbr\u003eStability\u003cbr\u003eSwitch selectable Tach or Armature voltage feedback, and Torque control\u003cbr\u003eAdjustable IR compensation for improved AVF speed regulation\u003cbr\u003eSelectable dual voltage ac supply\u003cbr\u003eAux speed trim input available in AVF mode\u003c\/p\u003e\n\u003cp\u003eTerminals:-\u003cbr\u003eAUX INPUT +\/-\u003cbr\u003eCURRENT INPUT\u003cbr\u003e+10V OUTPUT. 2mA max. (Use a 10K Ohm pot for external speed reference).\u003cbr\u003e4-20mA INPUT\u003cbr\u003eMIN SPEED. (Connect to minimum end of external speed pot. 5K Ohms preset to common).\u003cbr\u003eSPEED INPUT. 0 to +10V speed input from pot wiper.\u003cbr\u003eCOMMON.\u003cbr\u003eRUN. Internal 12K pull up to 10V.\u003cbr\u003eTACHO INPUT. (Or select Armature Voltage feedback )\u003cbr\u003eSPEED,CURRENT AND RAMP OUTPUTS\u003cbr\u003eSTALL AND ZERO SPEED DRIVERS\u003c\/p\u003e\n\u003cp\u003eInput Current: 4A to 6A (depending on motor inductance). Integral\u003cbr\u003eInput Voltage: 110 or 230V single phase +-10% at 50\/60Hz.\u003cbr\u003eField Rating: 0.5A @ 90% input voltage (For half wave field volts 45% input voltage, connect field to F- and N)\u003cbr\u003eArmature Form Factor: Typical form factor 1.5 (load dependant).\u003c\/p\u003e\n\u003cp\u003eWall mount in clean environment or cubicle mount.\u003cbr\u003eRated at -10° to 40°C Ambient.\u003cbr\u003eVentilation space above and below: 25mm, Ventilation space at sides: 0mm.\u003cbr\u003eHeat Loss at Max output: 12W.\u003cbr\u003eMounting via 4 x M4 x 20mm @ 89mm by 117mm\u003c\/p\u003e\n\u003cp\u003eManufacturer part number is 400.\u003c\/p\u003e\n\u003cp\u003eDownload the Sprint 400 Manual below:-\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"linkedfiles\"\u003e\n\u003cli class=\"linkedfiles_pdf\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/Sprint-Manual-400-800-1200.pdf?v=1777769353\" target=\"_blank\" rel=\"noopener\"\u003eSprint 400 800 1200 Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460554833,"sku":"400","price":1101.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/sprint_400.jpg?v=1780212561"},{"product_id":"sprint-400e-4a-1q-115v-230v-1ph-ac-to-dc-enclosed","title":"Sprint 400E 4A 1Q 115V\/230V 1ph AC to DC Enclosed","description":"\u003cdiv\u003e\n\u003cp itemprop=\"description\"\u003eSprint 400E - 4A Single Quadrant DC Thyristor Drive for 230 or 110V single phase AC input.\u003cbr\u003e230V AC supply - 0.55kW (0.75HP) at 180V DC for motor speed and torque control.\u003cbr\u003e110V AC supply - 0.25kW (0.37HP) at 90V DC.\u003cbr\u003eSimple to set-up in analogue form.\u003cbr\u003eAluminium Enclosure: 175mm Wide x 100mm Deep x 250mm High.\u003c\/p\u003e\n\u003cp\u003eControls Include...\u003cbr\u003e•On\/Off AC supply rocker switch\u003cbr\u003e•Set speed potentiometer\u003cbr\u003e•AC supply fuse\u003cbr\u003e•Toggle switch for forward, stop.\u003cbr\u003e\u003cbr\u003eFeatures...\u003cbr\u003eFully fused\u003cbr\u003eZero speed interlocked reversing\u003cbr\u003eDynamic braking\u003c\/p\u003e\n\u003cp\u003eFull part number is - 400E\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"linkedfiles\"\u003e\n\u003cli class=\"linkedfiles_pdf\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/Sprint-Enclosure-Manual.pdf?v=1777775947\"\u003eSprint Enclosure Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"linkedfiles_pdf\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/Sprint-Manual-400-800-1200.pdf?v=1777769353\"\u003eSprint 400 Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460587601,"sku":"400E","price":1677.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"sprint-400er-4a-1q-115v-230v-1ph-ac-to-dc-enclosed","title":"Sprint 400ER 4A 1Q 115V\/230V 1ph AC to DC Enclosed","description":"\u003cdiv\u003e\n\u003cp itemprop=\"description\"\u003eSprint 400ER - 4A Single Quadrant Reversing DC Thyristor Drive for 230 or 110V single phase AC input.\u003cbr\u003e230V AC supply - 0.55kW (0.75HP) at 180V DC for motor speed and torque control.\u003cbr\u003e110V AC supply - 0.25kW (0.37HP) at 90V DC.\u003cbr\u003eSimple to set-up in analogue form.\u003cbr\u003eAluminium Enclosure: 175mm Wide x 100mm Deep x 250mm High.\u003c\/p\u003e\n\u003cp\u003eControls Include...\u003cbr\u003e•On\/Off AC supply rocker switch\u003cbr\u003e•Set speed potentiometer\u003cbr\u003e•AC supply fuse\u003cbr\u003e•Toggle switch for forward, stop and reverse.\u003cbr\u003e\u003cbr\u003eFeatures...\u003cbr\u003eFully fused\u003cbr\u003eZero speed interlocked reversing\u003cbr\u003eDynamic braking\u003c\/p\u003e\n\u003cp\u003eFull part number is - 400ER\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"linkedfiles\"\u003e\n\u003cli class=\"linkedfiles_pdf\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/Sprint-Manual-400-800-1200.pdf?v=1777769353\"\u003eSprint 400 800 1200 Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460620369,"sku":"400ER","price":3086.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"sprint-400i-4a-1q-115v-230v-ac-to-dc-isolated-signals","title":"Sprint 400i 4A 1Q 115V\/230V AC to DC Isolated Signals","description":"\u003cdiv\u003e\n\u003cp itemprop=\"description\"\u003eSprint Electric 400i - 4.0A Single Quadrant Isolated DC Thyristor Drive for motor speed and torque control.\u003cbr\u003e230V AC supply - 0.55kW (0.74HP) at 180V DC .\u003cbr\u003e115VAC supply - 0.25kW (0.38HP) at 90V DC.\u003cbr\u003e\u003cem\u003e(Extra \u003c\/em\u003e\u003cem\u003eLow voltage variants are available see links below)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eSize: 100mm Wide x 35mm Deep x 160mm High. IP00\u003cbr\u003eWeight: 0.35kg\u003cbr\u003e\u003cbr\u003eAdjustments:-\u003cbr\u003eMax \u0026amp; Min Speed\u003cbr\u003eRamp Time\u003cbr\u003eMaximum Current\u003cbr\u003eStability\u003cbr\u003eSwitch selectable Tach or Armature voltage feedback\u003cbr\u003eAdjustable IR compensation for improved AVF speed regulation\u003cbr\u003eSelectable dual voltage ac supply\u003cbr\u003e\u003cbr\u003eInput Current: 4.0A to 6.0A (depending on motor inductance).\u003cbr\u003eInput Voltage: 110 or 230V single phase +-10% at 50\/60Hz.\u003cbr\u003eField Rating: 1A @ 90% input voltage (For half wave field output connect field between F2(T8) and N(T4) voltage @ 45% of input voltage)\u003cbr\u003eArmature Form Factor: Typical form factor 1.5 (load dependant).\u003cbr\u003eStall protection @ 150% included\u003c\/p\u003e\n\u003cp\u003eMounting: Cubicle mount via 4 x M4 x 20mm pillars @ 90mm x 145mm centres\u003cbr\u003eAmbient Temperature: Rated at -10° to 40°C.\u003cbr\u003eVentilation space above and below: 25mm, Ventilation space at sides: 0mm.\u003cbr\u003eHeat Loss: 20W at Max output.\u003c\/p\u003e\n\u003cp\u003ePart number: 400i.\u003c\/p\u003e\n\u003cp\u003eDownload the Sprint 400i manual below:-\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"linkedfiles\"\u003e\n\u003cli class=\"linkedfiles_pdf\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/Sprint-Manual-400-800-1200.pdf?v=1777769353\" target=\"_blank\" rel=\"noopener\"\u003eSprint 400i E400i Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460653137,"sku":"400i","price":1576.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"4a-1q-dc-drive-isolated-30-60v","title":"4A 1Q DC Drive (Isolated) 30\/60V","description":"","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460685905,"sku":"400i-LV60","price":992.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"sprint-680-6-8a-1q-115v-230v-1ph-ac-to-dc-non-isolated","title":"Sprint 680 6.8A 1Q 115V\/230V 1ph AC to DC Non Isolated","description":"","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460718673,"sku":"680","price":1172.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"sprint-680i-6-8a-1q-115v-230v-1ph-ac-to-dc-isolated-signals","title":"Sprint 680i 6.8A 1Q 115V\/230V 1ph AC to DC Isolated Signals","description":"","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460751441,"sku":"680i","price":1670.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"sprint-680xri-6-8a-4q-115v-230v-1ph-ac-to-dc-isolated-signals","title":"Sprint 680XRi 6.8A 4Q 115V\/230V 1ph AC to DC Isolated Signals","description":"\u003cdiv\u003e\n\u003cp itemprop=\"description\"\u003eSprint Electric 680XRi - 6.8A Four Quadrant (Regenerative) Isolated DC Thyristor Drive for motor speed and torque control.\u003cbr\u003e230V AC supply - 0.75kW (1.0HP) at 180V DC .\u003cbr\u003e110V AC supply - 0.55kW (0.74HP) at 90V DC.\u003cbr\u003e(Extra Low voltage variants are available see links below)\u003c\/p\u003e\n\u003cp\u003eSize: 70mm Wide x 120mm Deep x 105mm High. IP21\u003cbr\u003eWeight: 0.52kg\u003cbr\u003e\u003cbr\u003eAdjustments:-\u003cbr\u003eMax \u0026amp; Min Speed\u003cbr\u003eRamp Time\u003cbr\u003eMaximum Current\u003cbr\u003eStability\u003cbr\u003eSwitch selectable Tach or Armature voltage feedback\u003cbr\u003eAdjustable IR compensation for improved AVF speed regulation\u003cbr\u003eSelectable dual voltage ac supply\u003cbr\u003eAux speed trim input available in AVF mode\u003cbr\u003eSignal level comparitor\u003c\/p\u003e\n\u003cp\u003eInput Current: 6.8A to 10.2A (depending on motor inductance).\u003cbr\u003eInput Voltage: 110 or 230V single phase +-10% at 50\/60Hz.\u003cbr\u003eField Rating: 1A @ 90% input voltage (For half wave field volts 45% input voltage, connect field to F- and N)\u003cbr\u003eArmature Form Factor: Typical form factor 1.5 (load dependant).\u003cbr\u003eStall protection @ 150% included\u003c\/p\u003e\n\u003cp\u003eWall mount in clean environment or cubicle mount.\u003cbr\u003eRated at -10° to 40°C Ambient.\u003cbr\u003eVentilation space above and below: 25mm, Ventilation space at sides: 0mm.\u003cbr\u003eHeat Loss at Max output: 34W.\u003cbr\u003eMounting via Symmetrical DIN rail.\u003c\/p\u003e\n\u003cp\u003eManufacturer part number is 680XRi.\u003c\/p\u003e\n\u003cp\u003eDownload the Sprint 340XRi-1220XRi Application note and manual below:-\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"linkedfiles\"\u003e\n\u003cli class=\"linkedfiles_pdf\"\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/sprint_340XRi_680XRi_1220XRi_manual.pdf?v=1780208956\" target=\"_blank\"\u003eSprint Electric 340XRi 680XRi 1220XRi Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"linkedfiles_pdf\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/sprint_340XRi_1220XRi_application_manual.pdf?v=1780209061\" target=\"_blank\" rel=\"noopener\"\u003eSprint 340XRi 1220XRi Application Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460784209,"sku":"680XRi","price":3286.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/files\/sprint_340XRi_right.png?v=1780285783"},{"product_id":"800-8a-120v-230v-non-regen-non-reversing-non-isolated-dc-drive","title":"800 | 8A, 120V\/230V, Non-Regen, Non-Reversing, Non-Isolated DC Drive","description":"","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460816977,"sku":"800","price":1580.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"800e-8a-1q-115v-230v-1ph-ac-to-dc-enclosed","title":"800E 8A 1Q 115V\/230V 1ph AC to DC Enclosed","description":"","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460849745,"sku":"800E","price":1974.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"800er-8a-1q-115v-230v-1ph-ac-to-dc-enclosed","title":"800ER 8A 1Q 115V\/230V 1ph AC to DC Enclosed","description":"","brand":"SPRINT","offers":[{"title":"Default Title","offer_id":58963460882513,"sku":"800ER","price":3336.0,"currency_code":"AUD","in_stock":true}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/5282\/0305\/collections\/sprint-1600i-front.jpg?v=1777774204","url":"https:\/\/www.idadrives.com\/collections\/dc-drives-1ph-2ph-input.oembed","provider":"IDA","version":"1.0","type":"link"}